ROG CPU-Z !
posted by Franck Delattre - January 31th, 2011
Asus and CPUID are glad to offer you a version of the CPU-Z utility with the ROG look and feel. We hope that you will appreciate that very special version of CPU-Z !
You can download ROG CPU-Z 1.57.1 at that address.
Add a comment
Member account
Not already a member?
Register now and get connected with the biggest hardware benchmarking community!Register now
Like our Facebook page
Follow us on Twitter
Subscribe to the newsletter
Comments
usur , January 2nd, 2012 - #3816
nice,keep up the good work
Reply
suksinbig , December 05th, 2011 - #3745
thanks for your works
Reply
sadconnan , July 13th, 2011 - #3525
Good Program i think
Reply
herweel , May 21th, 2011 - #3470
Thanks for releasing this new version
Reply
habib , June 04th, 2011 - #3482
thanks for your works
Reply
alivelipasa , June 04th, 2011 - #3483
tahnks for your works
Reply
Lutz70 , March 16th, 2011 - #3393
Ok, meanwhile I got the answer myself. It is a feature from INTEL for power saving. If the cpu is idle it turns down the frequency. I just disabled the feature via BIOS and it shows now the specified frequency.
Now there is the next issue:
Reply
, March 16th, 2011 - #3392
Ok, meanwhile I got the answer myself. It is a feature from INTEL for power saving. If the cpu is idle it turns down the frequency. I just disabled the feature via BIOS and it shows now the specified frequency.
Now there is the next issue:
Reply
Lutz70 , March 16th, 2011 - #3390
I have a Gigabyte MoBo with a i7-2600 CPU. @ 3.4GHz. When I run CPU-Z (x64 latest version) the core frequency shows half the specified. Running i.e. the performance assesment of Win7-SP1, at the same time, than for some tests the frequency goes up to the
Reply
Lutz70 , March 16th, 2011 - #3389
I have a Gigabyte MoBo with a i7-2600 CPU. @ 3.4GHz. When I run CPU-Z (x64 latest version) the core frequency shows half the specified. Running i.e. the performance assesment of Win7-SP1, at the same time, than for some tests the frequency goes up to the
Reply
asdf , March 12th, 2011 - #3384
NICE
Reply
jon , June 23th, 2011 - #3511
Hi I can't get it to run. I double click the CPUID icon, it runs for a few seconds and then reports an error. I have zonealarm and I allow CPUID to access the internet when it asks. tried now 3 times without success. comments?
Reply
Gajendra , June 23th, 2011 - #3512
I like it ..... thax for reliseing new software
Reply
andy , March 08th, 2011 - #3372
thanks for a program like this killer program sent it to all my gamer friends!
Reply
Johnson , February 18th, 2011 - #3356
This version looks great. However, the voltage reading for my cpu doesn't work. It always reports 1.3v, where as I have 1.45v set in my bios.
Reply
jimz , February 20th, 2011 - #3357
Anyone where to get the binaries? Or is it install only?
Reply
gurke , February 24th, 2011 - #3362
can you update the rog version that it shows TDP as normal CPUZ 1.57 version?
Reply
Jack , June 21th, 2011 - #3506
Nice skin, neat to see vendors picking up CPUID and customizing it as a utility for their products. However, voltage is not reported (greyed out) on 1.57 of CPU-Z... this is true whether it is 1.57 of the ROG skinned version or 1.57 of the general releas
Reply
MPBull , March 2nd, 2011 - #3364
Nice Very NICE
Reply
raghunath , June 18th, 2011 - #3498
Thanks for releasing this new version. Glad to see the voltage now shows in the list. Thanks for all the hard owrk
Reply
ThunderS01 , February 2nd, 2011 - #3323
Thanks for releasing this new version, too, but I'm unhappy, NO Core Voltage is displayed with my hardware. :-(
MB: Asus Rampage II extreme ROG, Bios 1914
CPU: Intel Xeon W3520
OS: Windows 7 64-Bit Ultimate
Reply
Ceadderman , February 15th, 2011 - #3352
Core VID is directly across from the Technology Box. So you see "Technology[45nm] Core VID[1.400v]" respectively. Now my numbers are from my Crosshair w/955 BE but I doubt that matters much, only that the voltage is shown. ;)
Neubie2 , February 11th, 2011 - #3337
This is the by far the best looking version. Thx to CPUID and Asus for a great combo. Keep up the good work.
Reply
kwasior500 , February 09th, 2011 - #3335
Cannot validate with this version.
Reply
Ceadderman , February 15th, 2011 - #3351
Yes you CAN validate with this. I did it w/o issue. My validation number is 1656204. It's extremely simple to do as well. I don't know if you followed the connect the dot validation process of if you had software issues within the system but when I valida
Ceadderman , February 15th, 2011 - #3350
Yes you can validate with this version. Follow the bouncing ball and you will get it done. If you need confirmation look up 1656204. Worked perfectly fine imho. The only change to the program was the skin.
NOISIA , February 08th, 2011 - #3333
thanks!! good work...
Reply
3iw , February 03th, 2011 - #3327
thanks this 100% works for me.
Reply
a user , February 08th, 2011 - #3332
It seems that the application freezes the computer if the microprocessor is a Pentium III Xeon. Very old processo indeed, but still used here
Reply
cpuid , February 13th, 2011 - #3344
Can you please contact us concerning that problem ?
cpuz[at]cpuid[dot]com
Vic , February 03th, 2011 - #3326
Thanks for the download. not being computer savy it give me lot's of easy to read info.
so i can now trace the mother board makers and have some idea what they are talking about.
Vic
Reply
Chriscom , February 2nd, 2011 - #3321
Nice work!thx for sharing this with the users!!!
Reply
Chriscom , February 2nd, 2011 - #3322
Nice work!thx for sharing this with the users!!!
Reply
louis1978uk , March 18th, 2011 - #3395
hi awesome piece of work always loved cpuz and hwmonitor as a previous crosshair III formular 1090t user and no rampage III extreme 980x this is priceless and fitting with rog however my cpu displays as
Intel(R) Core(TM) i7 CPU X000 @3.33
<
Reply
baburam , February 04th, 2011 - #3328
thanks.......... it helps me to get the right information about the pc.
Reply
Javed khan , February 04th, 2011 - #3329
its very good soft
Reply
scuzzy , February 2nd, 2011 - #3318
Is there an portable edition avaiable?
Reply
J. Kenney , February 2nd, 2011 - #3313
Is there a portable self-extract version of this?
And will it work with older generations of computers?
Reply
andy , February 2nd, 2011 - #3314
i like the way this version is colored. makes it pop off the screen. looks great
Reply
KILLER_K , February 2nd, 2011 - #3315
Thanks for releasing this new version. Glad to see the voltage now shows in the list. Thanks for all the hard work.
Reply
Arsalan , March 07th, 2013 - #57660
windows 8 support or not?
Reply
Anomaly , March 28th, 2013 - #57827
I also have an Asus G75VW and it does crash without fail, can't run it or uninstall it without it locking up the laptop. (although I can re-install it) Running windows 8. Downloaded the newest non ROG version and it works, doesn't show individual memory m
Reply
anis , March 20th, 2013 - #57765
Nothing happends exept that my Laptop crashes (Asus G75VW)
Reply